Downloads
Bourke Corner Workstation Range - Made in Ballarat, Australia
Made in Ballarat, Australia- from high quality Australian made Melamine. Bourke Corner Workstations are a suitable for a lot of environments. Made from 25mm Melamine and have adjustable feet in the 25mm end panels. Made to order we can make them in any size to fit even quirky spaces.
Choose from many different colours. If the size you are looking for is not listed here, please contact us for a quote.
Bourke Corner Workstation
Desk Height 725mm
Melamine with flat edge trim
25mm top over 25mm ends
Levelling feet to balance out uneven floors
2.5mm quirks at side, front & back
Standard Modesty H445mm (gap to floor 255mm)
Default 60mm cable hole & cover located in Top - Corner Back
Suits our Mobile metal runner mobile pedestals (not included in this price)
Made in Ballarat, Australia
Options:
1 piece top or 2 piece top
Main desk can be made to be RHS or LHS
Splayed Internal or Curved Internal
Modesty Panel H350mm [gap to floor 350mm]
Full Modesty Panel
Dual colour design
60mm or 80mm Cable Management Holes
A variety of sizes. Both wings can be the same length or can be different lengths
Note Modesty Heights:
350mm - 350mm gap to floor- good for access to power points
445mm - 255mm gap to floor- good for concealing under desk
Corner Workstations manufactured in Ballarat from high quality Australian made Melamine Board
Bourke Corner Workstation
1200 x 1200 x D750 x H725mm
1 piece top
2.5mm overhang (quirks)
Curved Internal
25mm tops over 25mm end Panels
Levelling Feet to adjust on uneven ground
Default Modesty Height 445mm - 255mm gap to floor
Default 60mm cable hole & cover located in Top - Corner Back
Made in Ballarat, Australia
Finish: L2 melamine & flatedge trim
Colour
Options:
Splay Internal
Modesty height Height of 350mm - 350mm gap to floor
Note Modesty Heights:
350mm - 350mm gap to floor- good for access to power points
445mm - 255mm gap to floor- good for concealing under desk
Corner Workstations manufactured in Ballarat from high quality Australian made Melamine Board
Bourke Corner Workstation
1800 x 1800 x D600 x H725mm
1 piece top
2.5mm overhang (quirks)
Splay Internal
25mm tops over 25mm end Panels
Levelling Feet to adjust on uneven ground
Default Modesty Height 445mm - 255mm gap to floor
Default 60mm cable hole & cover located in Top - Corner Back
Made in Ballarat, Australia
Finish: L1 melamine & flatedge trim
Colour
Options:
Curved Internal
Modesty height Height of 350mm - 350mm gap to floor
Note Modesty Heights:
350mm - 350mm gap to floor- good for access to power points
445mm - 255mm gap to floor- good for concealing under desk
Corner Workstations manufactured in Ballarat from high quality Australian made Melamine Board
Bourke Corner Workstation
1800 x 1800 x D600 x H725mm
1 piece top
2.5mm overhang (quirks)
Splay Internal
25mm tops over 25mm end Panels
Levelling Feet to adjust on uneven ground
Default Modesty Height 445mm - 255mm gap to floor
Default 60mm cable hole & cover located in Top - Corner Back
Made in Ballarat, Australia
Finish: L2 melamine & flatedge trim
Colour
Options:
Curved Internal
Modesty height Height of 350mm - 350mm gap to floor
Note Modesty Heights:
350mm - 350mm gap to floor- good for access to power points
445mm - 255mm gap to floor- good for concealing under desk
Bourke Corner Workstation
1800 x 1800 x D600 x H725mm
2 piece top
2.5mm overhang (quirks)
Splay Internal
25mm tops over 25mm end Panels
Levelling Feet to adjust on uneven ground
Default Modesty Height 445mm - 255mm gap to floor
Default 60mm cable hole & cover located in Top - Corner Back
Made in Ballarat, Australia
Finish: L1 melamine & flatedge trim
Colour
2 Piece, define sides
Options:
Curved Internal
Modesty height Height of 350mm - 350mm gap to floor
Note Modesty Heights:
350mm - 350mm gap to floor- good for access to power points
445mm - 255mm gap to floor- good for concealing under desk
Corner Workstations manufactured in Ballarat from high quality Australian made Melamine Board
Bourke Corner Workstation
1800 x 1800 x D600 x H725mm
2 piece top
2.5mm overhang (quirks)
Splay Internal
25mm tops over 25mm end Panels
Levelling Feet to adjust on uneven ground
Default Modesty Height 445mm - 255mm gap to floor
Default 60mm cable hole & cover located in Top - Corner Back
Made in Ballarat, Australia
Finish: L2 melamine & flatedge trim
Colour
2 Piece, define sides
Options:
Curved Internal
Modesty height Height of 350mm - 350mm gap to floor
Note Modesty Heights:
350mm - 350mm gap to floor- good for access to power points
445mm - 255mm gap to floor- good for concealing under desk
Corner Workstations manufactured in Ballarat from high quality Australian made Melamine Board
Bourke Corner Workstation
1800 x 1800 x D700 x H725mm
2 piece top
2.5mm overhang (quirks)
Curve Internal
25mm tops over 25mm end Panels
Levelling Feet to adjust on uneven ground
Default Modesty Height 445mm - 255mm gap to floor
60mm cable hole & cover located Corner Back
Made in Ballarat
Finish: L2 melamine & flatedge trim
Colour
2 Piece, define sides
Options:
Splay Internal
Modesty height Height of 350mm - 350mm gap to floor
Note Modesty Heights:
350mm - 350mm gap to floor- good for access to power points
445mm - 255mm gap to floor- good for concealing under desk
Bourke Corner Workstation
1800 x 1800 x D750 x H725mm
Available as 1, 2 or 3 piece top - specify side of main desk for 2 piece
Curve Internal
With 60mm cable hole & cover
25mm tops over 25mm end Panels & adjustable feet
Modesty Panels: 350mm [gap to floor of 350mm]
2.5mm overhang (quirks)
Finish: L1 melamine & flatedge trim
Optional: modesty H455mm [gap to floor of 255mm]
Bourke Corner Workstation
1800 x 1800 x D750 x H725mm
Available as 1, 2 or 3 piece top - specify side of main desk for 2 piece ****
Curve Internal
With 60mm cable hole & cover
25mm tops over 25mm end Panels & adjustable feet
Modesty Panels: 350mm [gap to floor of 350mm]
2.5mm overhang (quirks)
Finish: L2 Melamine Colours
Optional: modesty H455mm [gap to floor of 255mm]
